PRODUCTS products
-
Free hotline
0086-13455388360
DT-W07 Selected Work Bench Model A
Content
DT-W07 Selected Work Bench Model A
Standard sizes:1200L*570W*2000H(mm)
Table size:
1200L*570W*800H (mm)
1- Panel:2.0mm stainless steel panel,Edge 15mm high,14pcs M8
bolts welded through the 25mm thickness wooden backboard
2-Test bad stand:Right side cabinet with lock, two partitions
for the maintenance of accessories, tools and so on
3- Light:3pcs full view LED-12W top light
4- Socket:2pcs,International common standard
5- Switch:2pcs,Respectively control both sides and the middle
LED dome light on and off
6- Compressed air is introduced into the setting : ∅
8
introduction of a gas source plug 1, the output gas source
shortcut plug 1, it is recommended: use away from the test bad
7- Air gun:1pc
8- Out of the duct settings:Optional air filter device, you
can form the work area of the desktop area of the positive
pressure, to achieve local dust-free operation, to meet the
precise maintenance needs
9- Siding frame of the standard configuration:Storage slot
board 2pcs
10- Stand support: 4pcs M16 bolts for keeping the table flat .
Add: High-Tech Zone, Taian, Shandong, China.
TEL:+86-13455388360 FAX: +86-538-2096189 E-mail: dongtai-china@hotmail.com
TAIAN DONGTAI MACHINE MANUFACTURING CO.,LTD 備案號(hào):魯ICP備15006010號(hào)-1