国产精品污www在线观看,国产乱妇无码大片在线观看,亚洲精品无人区,成人无码视频在线观看

TEL：

0086-13455388360

DPF-89H DPF , DOC, SCR Intelligent Automotive Aftereatment Regeneratiom Equipment

Name：*
     Tel：
 Email：*
  Note：

Content

FAQ:
1. What way for regeneration? Oil? Electricity? Water?
Answer: With 380V electricity, electricity is converted into high temperature heat energy of 0~800℃ for regeneration.
2. Why is the regeneration time so fast? What is the effect?
Answer: During regeneration, the heating is directly from the core part, without passing through the heat insulation layer from the outside to the
inside to heat, the core position reaches 700 ℃ within ten minutes, and the surface temperature of the exhaust pipe is only about 100 ℃ at this time,it is conceivable , when the outside of the exhaust pipe reaches 700 ° C, what is the internal temperature? Therefore, here can reduce the time for several hours, and automatically open the high-pressure purge mode while maintaining the temperature. During the regeneration process, carbon deposits, carbon ash, etc. have been Basically clean up. After the regeneration is completed, the equipment automatically turns on the rapid cooling mode, and the temperature drops to about 40 ° C within 5 minutes. The natural cooling time takes 2 hours or more; finally, the blast mode can be activated to completely remove the residue from the exhaust pipe. After testing and certification by authoritative institutions, the permeability after regeneration is as high as 96%, which is called perfect effect.
3. At present, the environmental protection of each region is strictly checked, does it meet the environmental protection standards?
Answer: The equipment is equipped with a thermal mutual anti-warm water cooler. The carbon deposited during regeneration and the carbon ash
emitted during gas explosion after regeneration will be sucked into the cooler. After filtration through water, all impurities will be collected, and just need to clean the filter element in time.
Pre:F00VC01373 Next:NO.132(2-3) Grinding tools for  CAT C7/C9 Pump valve core assembly